Permanent Dance with Fixed Plate Dancing for Home Dance with Ceiling Mount and Extension Accessories More Safety and Stability
Our fixed plate dance is safe for home studio use and fits ceilings from 7.3 to 9 feet with a 45mm diameter. The package includes 2 extension and a height adjuster, but please make sure to measure your ceiling height and choose the right size . If your ceiling is over 9 feet, we have 3 extension sizes available for separate purchase.
Prepare the installation area. Before you start mounting your , make sure you have enough clearance around it, a stable surface to stand on, and the necessary tools and hardware. You'll need a drill, screws, anchors, a spirit level, a measuring tape, and a ladder or stool if your ceiling is high. It's also recommended to clean the area and remove any obstacles or hazards that could interfere with your dancing.
Mark and drill the holes(only the ceiling). Once you have determined the best spot for your , mark the points where you'll drill the holes. The holes should be evenly spaced and aligned with the center of the . Use a spirit level to ensure that your will be vertical and not tilted. Then, drill the holes with the appropriate size of the bit and insert the anchors if needed.
Install the top plates. The top plates are the components that secure your to the ceiling and floor. Attach the top plate to the ceiling, using the screws and a wrench or pliers. Make sure the plates are tight and flush with the surface.
Assemble and test the . Now that you have mounted the top plates, it's time to connect the sections and lock them in place. Follow the instructions provided by the manufacturer, then put the bottom base on the ground, and tighten the extension. Once you have assembled the , give it a gentle shake and test its stability. If it wobbles or bends, you may need to adjust the screws or extensions.
